Mitsubishi Eclipse 1990 Service Manual page 1848

Section A-A
Section B-B
C-C
(in.)
BODY
Windshield and Window Glass
(1) Apply a uniform coat of primer to the illustrated areas
breaks or thin spots.
Specified primer:
Caution
1.
2. Never touch the primer coated surface.
(2) Allow 3 to 30 minutes to dry the primer.
Primer
(3) Within 30 minutes after applying the primer, fill the sealant
gun with adhesive and apply the adhesive evenly around
the entire circumference of the glass.
(Refer to
Specified adhesive:
NOTE
Cut the nozzle tip of the sealant gun into a
to facilitate adhesive application.
TSB Revision
QUARTER WINDOW GLASS ASSEMBLY
INSTALLATION
of the body and glass making sure it is applied without
ATD Part No. 8608 Super Fast Urethane Primer
or equivalent
Always use the primer to strengthen bonding pow-
er. Make sure that it covers the surfaces complete
Note that the primer if applied too thick
cause loss of bonding power.
ATD Part No. 8609 Super Fast Urethane or
equivalent
shape