Mitsubishi Eclipse 1990 Service Manual page 1253

AUTOMATIC TRANSAXLE
OVERHAUL
pulse
to the. specified torque.
Tightening torque: 11 Nm (8
applying automatic transmission fluid to the outside
surface of the oil pump-side cylindrical portion of the torque
converter, install the torque converter carefully-so as not
to give damage to the oil seal lip.
torque converter is in mesh with the
the converter housing end.
The torque converter has been properly installed when
the measurement is about 12 mm
TSB Revision
the distance between the ring gear end and
the
gear.
in.)