Editing An Edid; Creating An Edid - Easy Edid Creator; Edid Summary Window - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.9.2. Editing an EDID
Select an EDID from Source panel and press Edit button to
display Advanced EDID Editor window. The editor can read
and write all descriptors, which are defined in the standards, including
the additional CEA extensions. Any EDID from the device's memory or
a saved EDID file can be loaded into the editor. The software resolves
the raw EDID and displays it as readable information to the user. All
descriptors can be edited, and saved in an EDID file, or uploaded to the
User memory.
EDID Editor window
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
6.9.3. Creating an EDID - Easy EDID Creator
Since above mentioned Advanced EDID Editor needs
EDIT
more detailed knowledge about EDID, Lightware
introduced a wizard-like interface for fast and easy EDID creation.
With Easy EDID Creator it is possible to create custom EDIDs in four
simple steps. By clicking on the Create button below Source panel, Easy
EDID Creator is opened in a new window.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
CREATE
EDID Creator window
6.9.4. EDID Summary Window
Select an EDID from Source panel and press Info button to
display EDID summary.

EDID summary window

67 67
INFO