Removing And Installing Intake Manifold Upper Part - Volkswagen CC 2012 Workshop Manual

– Install connecting pipe of fuel rail.
Note
First tighten union nuts for connection pipe hand tight, then
♦
tighten to specified torque.
Make sure that the connecting pipe does not touch any other
♦
components.
– Installing high-pressure pump
– Install upper part of intake manifold
Bolted connection
Intake manifold lower part to
cylinder head
Fuel rail to cylinder head
High-pressure pump to cylinder
head
Union nuts for high-pressure
fuel line
Union nuts for fuel rail connect‐
ing line
4) Renew
4.3 Removing and installing intake manifold
upper part
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
♦ Assembly tool - T10118-
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
⇒ page 195 .
⇒ page 181
Torque setting
8 Nm
1
4)
30 Nm + 90° ( / 4 turn) further
10 Nm
28 Nm
28 Nm
.
181
4. Intake manifold