Running The Afu; Accessing The Afu From The Gui; Accessing The Afu From The Command Line - Adaptec RAID 2120S Software Reference Manual

2
Create a bootable MS–DOS floppy diskette and copy the
following files to this diskette:
■
AFU.exe
■
AC2xx001.ufi
where 2xx0 is the model number of your controller.
3
Copy the remaining UFI files to additional diskettes.

Running the AFU

You can run the AFU from its graphical user interface (GUI) or from
the command line.

Accessing the AFU from the GUI

To access the AFU GUI:
1
At the DOS command prompt (typically A:\>), type AFU with
no arguments.
The main menu to the AFU GUI, which is self-explanatory, is
displayed.
2
Select Select Controllers and select the controller(s) to be
flashed.
3
Select Select an Operation.
4
Select any available AFU function and follow the on-screen
instructions.

Accessing the AFU from the Command Line

At the DOS command prompt (typically A:\>), enter the command
AFU followed by a command keyword and any optional switches.
The AFU processes your command with no further interaction
then exits with the status "success" or a specific error message code.
The syntax of the AFU command line is as follows:
AFU <Command> [/C<Controller ID>] [/D <UFI File Path>] [/?]
In this command line:
1
The AFU will prompt you to insert additional floppy diskettes as required.
Using the Adaptec Flash Utility
1
and
12-5