Examples - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
AAC0>disk list
Executing: disk list
C:ID:L Device Type Blocks
------ ---------- --------- ----------- ----------- ------ ----
2:00:0 Disk 8887200
2:01:0 Disk 8887200
2:02:0 Disk 8496960
2:03:0 Disk 8887200
The detailed disk list display contains the previous columns of
information plus the following columns:
■ Removable media
■ Vendor-ID
■
Product-ID
■ Rev
The following sections provide more information on the columns of
information that the disk list command displays.
The C:ID:L Column
The C:ID:L column displays the SCSI device channel number, the
SCSI device ID, and the SCSI device logical unit number for each
disk on the currently opened controller. (The display shows only
one disk if you specified a particular disk.)
In the example, the command displays the SCSI channel number,
the SCSI device ID, and the SCSI device logical unit number for the
four disks on the open controller.
The Device Type Column
The Device Type column displays the SCSI device type. The disk
list command can display one of the values listed in Table 7-1.
Table 7-1. Device Type Values
Value Meaning
Disk The device type is a SCSI direct access device.
Typically, these are disk drives. This value appears
in the example.
Sequential The device type is a SCSI sequential access device;
typically, tape drives.
7-6
Bytes/Block Usage
512 Initialized
512 Initialized
512 Initialized
512 Initialized
Shared Rate
NO 40
NO 40
NO 40
NO 40