Syntax - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
diagnostic show boot_parameter
To display a specific boot-time parameter (if one exists) that a
technical support representative might need, use the diagnostic
show boot_paramter command.
Caution:
Use this command only under the direction of
!
technical support.

Syntax

diagnostic show boot_parameter
Parameters
{string}
Specifies the boot-time parameter character string whose
associated value you want to display. If you need to use this
command, a technical support representative will tell you the
name of the boot-time parameter to use.
Related Information
diagnostic commands:
■
diagnostic clear boot_parameters
■
diagnostic set boot_parameter
8-12
(page 8-2)
(page 8-11)