Related Information - Adaptec RAID 2120S Software Reference Manual

shows, power supply 0 on enclosure management device 1 is off and
operational:
AAC0>enclosure show power
Executing: enclosure show power
Enclosure Power State
--------- ----- ------------ -------
0 0 ON
1 0 ON
The following example turns on power supply 0 on enclosure
management device 1:
AAC0>enclosure set power 1 0
Executing: enclosure set power 1 0
You may want to use the enclosure show power command
again to see the change in the power supply's status, as in the
following example:
AAC0>enclosure show power
Executing: enclosure show power
Enclosure Power State
--------- ----- ------------ -------
0 0 ON
1 0 ON

Related Information

enclosure commands:
■
enclosure list
■
enclosure show power
Status
OK
OK
Status
OK
OK
(page 11-7)
(page 11-30)
enclosure Commands
11-21