Diagnostic Commands; Syntax; Examples; Related Information - Adaptec RAID 2120S Software Reference Manual

diagnostic dump structures

To save internal data structures to a file for use by technical support,
use the diagnostic dump structures command.
Caution:
Use this command only under the direction of
!
technical support.

Syntax

diagnostic dump structures
Parameters
{string}
Specifies the name of the file to contain the internal data
structures. Use the file naming conventions associated with the
operating system on which the controller is running.
For example, if your controller is running under Windows
NT/Windows 2000 (basic disk only)/Windows XP (basic disk
only), use the Windows NT/Windows 2000/Windows XP file
name conventions. If the file name has spaces, use quotation
marks ("") to enclose the string.

Examples

The following example saves the internal data structures to a file
called c:\aac0loginfo\dump.txt on a Windows NT/Windows
2000 (basic disk only)/Windows XP (basic disk only) system:
AAC0>diagnostic dump structures c:\aac0loginfo\dump.txt
Executing: diagnostic dump structures "c:\aac0loginfo\dump.txt"

Related Information

diagnostic commands:

■
diagnostic dump text
logfile commands:
■
logfile start
(page 8-4)
(page 9-3)
diagnostic Commands
8-3