Related Information - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
The following example sets cache parameters for array 0 by
accepting all of the defaults:
AAC0>container set cache 0
Executing: container set cache 0
After setting cache parameters for a specific array, use the
container show cache command to display cache parameter
information, as in the following example:
AAC0>container show cache 0
Executing: container show cache 0
Global container Read Cache Size
Global container Write Cache Size : 1970176
Read Cache Status
Write Cache Status
Stream Detection Status

Related Information

container commands:
■
container release_cache
■
container show cache
5-100
: 5345280
: ENABLED
: ENABLED
: ENABLED
(page 5-83)
(page 5-110)