Disk Show Space; Syntax; Parameters; Switches - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide

disk show space

To display space usage information on a SCSI disk, use the disk
show space command.

Syntax

disk show space [/all{=boolean}] [{scsi_device}]

Parameters

{scsi_device}
Specifies the ID for the SCSI device for which you want to
display space usage information. A SCSI ID consists of a SCSI
channel number (for example, 0, 1, 2, 3, etc.), a SCSI device ID
(0 through 15 inclusive), and a SCSI device logical unit number
(0 through 7 inclusive). See the scsi_device section on
page 3-7 for more information on how to specify the SCSI
device.

Switches

/all{=boolean}
Specifies whether to show space usage information for all SCSI
disks on the currently opened controller. If you set this switch
to TRUE, the command shows space usage information for all
SCSI disks on the currently opened controller.
This switch defaults to FALSE if you specify the scsi_device
parameter; otherwise, the switch defaults to TRUE.

Examples

The following example shows space usage information for all of the
SCSI disks on the currently opened controller:
AAC0>disk show space
Executing: disk show space
Scsi C:ID:L Usage
----------- ---------
0:02:0 Array
0:02:0 Free
0:03:0 Free
0:04:0 Free
0:05:0 Free
7-26
Size
-------------
64.0KB: 20.0MB
20.0MB: 29.0MB
64.0KB: 49.0MB
64.0KB: 49.0MB
64.0KB: 49.0MB