Diagnostic Set Boot_Parameter; Parameters; Diagnostic Show Boot_Parameter; Syntax - Adaptec RAID 2120S Software Reference Manual

diagnostic set boot_parameter

To set boot-time parameters that a technical support representative
might need, use the diagnostic set boot_parameter
command.
Caution:
Use this command only under the direction of
!
technical support.

Syntax

diagnostic set boot_parameter

Parameters

{string}
Specifies the name of the boot-time parameter to be set. If you
need to use this command, a technical support representative
will tell you the name of the boot-time parameter to use.
{integer}
Specifies the value for the boot-time parameter specified in the
string parameter. If you need to use this command, a
technical support representative will tell you the value to use.

Related Information

diagnostic commands:
■
diagnostic clear boot_parameters
■

diagnostic show boot_parameter

diagnostic Commands
(page 8-2)
(page 8-12)
8-11