HELP
The HELP command displays a summary of AFU functions
and command switches.
Note that you can also issue the following command to display
the help text for the AFU:
AFU /?
Options
None
Default Switch Values
None
Examples
A:\> AFU HELP
A:\> AFU /?
LIST
The LIST command displays the AFU-supported controllers
installed on your system. Use this command to see which
controllers are installed on this system, or to identify the ID
numbers assigned to each physical controller.
Note that, unlike most other AFU commands, the LIST
command does not shut down the controller's kernel or
otherwise interrupt the controller's normal operation. You do
not have to reset the controller upon completion of this
command.
Options
None
Default Switch Values
None
Example
A:\> AFU LIST
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2002. All Rights Reserved.
Controllers Detected and Recognized:
Using the Adaptec Flash Utility
12-9