To Access The Cli From The Unix/Linux Prompt, Display A; Setting Up Directory Paths In The .Login And .Cshrc Files; Accessing The Cli From The Netware Server Console; Accessing The Cli From The Unix Prompt - Adaptec RAID 2120S Software Reference Manual

■ From the NetWare server console
To access the CLI from the NetWare server console, type aaccli
at the prompt. When the system displays the CLI> prompt,
which indicates that you can now use CLI commands.
■ From the UNIX/Linux prompt
To access the CLI from the UNIX/Linux prompt, display a window
and type aaccli in any directory. When the system displays the
CLI> prompt, you can use CLI commands. For the commands to
work in any directory, the path in the startup file (.login or
.cshrc) must include the directory where the software is installed.
See your UNIX/Linux documentation for information on setting up
directory paths in the .login and .cshrc files.
Accessing the CLI from the NetWare Server
Console
To access the CLI from the NetWare server console, type aaccli at
the prompt. The system displays the CLI> prompt, which indicates
that you can now use CLI commands.

Accessing the CLI from the UNIX Prompt

To access the CLI from the UNIX prompt, display a window and
type aaccli in any directory. The system displays the CLI>
prompt, which indicates you can now use CLI commands. For the
command to work in any directory, the path in the startup file
(.login or .cshrc) must include the directory where the software
is installed. See your UNIX documentation for information on

setting up directory paths in the .login and .cshrc files.

Accessing the Command Line Interface
2-3