Adaptec SCSI RAID Software Reference Guide
diagnostic clear boot_parameters
To clear all boot-time parameters contained in the currently opened
controller's parameters, use the diagnostic clear
boot_parameters command. Under normal conditions, no boot-
time parameters are set.
Caution:
Use this command only under the direction of
!
technical support.
Syntax
diagnostic clear boot_parameters
Examples
The following example clears all boot-time parameters:
AAC0> diagnostic clear boot_parameters
Executing: diagnostic clear boot_parameters
All boot time parameters cleared to default values.
Related Information
diagnostic commands:
■
diagnostic set boot_parameter
■
diagnostic show boot_parameter
8-2
(page
8-11)
(page
8-12)