Switches; Examples; Related Information - Adaptec RAID 2120S Software Reference Manual

Switches

/off{=boolean}
Specifies whether to turn off the fan associated with the
specified unit number. If you set this switch to TRUE, the
command turns off the fan associated with the specified unit
number. You must turn on the fan if you want to set its speed.
This switch defaults to FALSE, which means the fan remains
on and you can set its speed.

Examples

The following example sets fan unit 0 on enclosure management
device 0 to full speed:
AAC0>enclosure set fan 0 0 4
Executing: enclosure set fan 0 0 4

Related Information

enclosure commands:
■
enclosure list
■
enclosure set alarm
■
enclosure set power
(page 11-7)
(page 11-14)
(page 11-20)
enclosure Commands
11-17