Examples - Adaptec RAID 2120S Software Reference Manual

/label{=string}
Specifies a label to be assigned to the newly created volume
set. You can specify a maximum of sixteen characters for the
label.
If you do not specify the switch, it defaults to no label. If you
do not specify a label, you can do so later by using the
container set label command.
Note that this label is not the label that displays in Windows
Explorer. The label displayed by Windows Explorer comes
from the label specified with the container format
command.

Examples

Before creating a volume set, use the disk show space command
to obtain information about the available SCSI devices, as in the
following example:
AAC0>disk show space
Executing: disk show space
Scsi C:ID:L Usage Size
----------- --------- -------------
0:00:0 Free 64.0KB:
0:01:0 Free 64.0KB:
0:02:0 Free 64.0KB:
0:03:0 Free 64.0KB:
0:04:0 Free 64.0KB:
0:05:0 Free 64.0KB:
0:06:0 Free 64.0KB:
0:08:0 Free 64.0KB:
The example list shows that there are eight SCSI disks available to
create the volume set.
The following example creates a volume set on SCSI disk
with a freespace of 15 MB:
AAC0>container create volume ((0,2,0), 15M)
Executing: container create volume ((CHANNEL=0,ID=2,LUN=0),15,728,640)
container 0 created
On UNIX systems, the message displayed after you execute the
container create volume command includes the root special
file associated with the newly created volume set.
container Commands
11.0MB
11.0MB
49.0MB
49.0MB
49.0MB
49.0MB
11.0MB
11.0MB
(0,2,0)
5-37