Conventions - Adaptec RAID 2120S Software Reference Manual

Chapter 8, diagnostic Commands, describes the commands used to
help fix problems that may occur during controller operation.
Chapter 7, disk Commands, describes the commands related to disks.
Chapter 9, logfile Commands, describes the commands used to record
CLI command activities.
Chapter 10, task Commands, describes the commands used to work
with tasks.
Chapter 11, enclosure Commands, describes the enclosure commands,
which operate on enclosure management devices.
Chapter 12, Using the Adaptec Flash Utility, describes how to use the
DOS application to update the flash EEPROM components.
Chapter 13, Using the Array Configuration Utility, describes how to
use the BIOS utility for creating, configuring, and managing arrays.
Appendix A, Automated Scripts, provides examples of how to use the
CLI commands in DOS command scripts.

Conventions

The following typographical conventions are use in this reference
guide.
bold Used to highlight information depicted in
examples (for example, the Type column
indicates that a RAID-5 set resides on
array 0).
Used to highlight commands in text (for
Courier
example, the
command).
array create mirror
Getting Started
1-3