Adaptec SCSI RAID Software Reference Guide
diagnostic dump text
To display diagnostic information on the console display for use by
technical support during bug reporting, use the diagnostic dump
text command.
Caution:
Use this command only under the direction of
!
technical support.
Notes
Before using this command on Windows NT/Windows 2000 (basic
disk only)/Windows XP (basic disk only), you might want to make
sure to set up your MS-DOS window to scroll data. See your
Windows NT/Windows 2000 (basic disk only)/Windows XP (basic
disk only) documentation.
Before using this command on other operating systems, you might
want to make sure your windowing system is set up to scroll data.
See your operating system documentation.
You might also want to use the logfile start command to make
sure the diagnostic-related information gets sent to the logfile.
Syntax
diagnostic dump text
8-4