Script File Syntax - Adaptec RAID 2120S Software Reference Manual

arrays. Consequently, the parent task indicates 0% to 100% and the
child tasks always indicates 0%.
Build/Verify Operations on RAID 10 Arrays
For a RAID 10 array, the status message indicates the percent of the
build/verify completed for the parent and child tasks. The status
updates to OK when the tasks complete. A sample RAID 10 build
status is as follows:
Array #1 Status : BUILD/VERIFY = 30%
Build/Verify Operations on RAID 50 Arrays
For a RAID 50 array, the status message indicates the percent of the
build/verify completed for the parent and child tasks. The status
updates to OK when the tasks complete. A sample RAID 50 build/
verify status is as follows:
Array #1 Status : BUILD/VERIFY = 30%

Script File Syntax

An ACU script file consists of one of the following:
■ Array definition block—Specifies the properties of an array, such
as type, size, and cache settings. The block begins with the
keyword Array and ends with the keyword End.
■ Channel definition block—Specifies the properties of a controller
channel, such as ControllerID. The block begins with the
keyword Channel and ends with the keyword End.
Each array or channel property consists of a property keyword and
assigned value, separated by an equal sign (=). Each property must
be on its own line in the script. The order of properties within a
block (other than the starting Array or Channel keyword, and the
ending End keyword) is not significant.
Some array properties, such as Type, are required; others are
optional. Table 13-4 lists and describes array definition block
properties, indicates which properties are optional, and provides the
default value used when that property is not specified.
All keywords can be written in any combination of upper- or
lowercase characters. Script lines can include any number of spaces
and tabs both within keywords, or when separating keywords and
their values. Blank lines are ignored.
Using the Array Configuration Utility
13-15