Controller Show Array_Verify; Syntax; Examples; Related Information - Adaptec RAID 2120S Software Reference Manual

controller show array_verify

To display the array verify status (enabled or disabled) for the
specified controller, use the controller show array_verify
command.

Syntax

controller show array_verify

Examples

Before turning the array verify feature on or off, check its status by
using the controller show array_verify command.
The following example shows that the controller's automatic
failover is currently on (enabled). The command also displays the
number of errors (if any) found as a result of the array verify
operation.
AAC0> controller show array_verify
Executing: controller show array_verify
Array verify ENABLED
Errors found 0

Related Information

controller commands:
■
controller set array_verify
controller Commands
(page
6-21)
6-27