Using the Adaptec Flash
Utility
In this Chapter
Introduction
Overview of the AFU
System Requirements
Firmware Floppy Kit
Running the AFU
Accessing the AFU from the GUI
Accessing the AFU from the Command Line
Flashing the Firmware Using AFU
AFU Commands
AFU Error Handling
Introduction
®
The Adaptec
Flash Utility (AFU) is a DOS application used to
update the flash EEPROM components on one or more Adaptec
SCSI RAID controllers. The utility can also be used to verify a
controller's current flash contents against the flash images in a
specified file or to save a controller's current flash contents to a file.
12
12-1
12-2
12-3
12-4
12-5
12-5
12-5
12-7
12-8
12-13
12-1