Using Script Mode - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
■ You cannot make a non-00 array bootable if the array is in a
build/verify or reconfiguration process.
■
The controller always uses the lowest numbered array as its
bootable array. If you delete array 00 for any reason, the next
higher numbered array becomes the boot array. Mark the correct
array as the bootable array by making it array 00.
■
If the controller is not a boot device, you can disable its runtime
BIOS to conserve ROM.
Deleting Arrays
!
Caution:
Back up the data on an array before you delete it.
All data on the array is lost when you delete the array, and
you cannot restore a deleted array.
To delete an existing array:
1
Select Manage Arrays from the Main menu.
2
Select the array you want to delete and press Delete.
3
In the Array Properties dialog box, press Delete again and press
Enter. The following prompt is displayed:
Warning!! Deleting will erase all data from the
array.
Do you still want to continue? (Yes/No):
4
Press Yes to delete the array or No to return to the previous
menu. At the Array Properties dialog box, press Delete again
and press Enter.
5
Press Esc to return to the previous menu.

Using Script Mode

To use the ACU scripting features, issue the command ACU with one
of the following required switches:
■ /P—Playback mode. This mode configures arrays and channel
settings from a specified script file.
13-8