Command Availability - Adaptec RAID 2120S Software Reference Manual

history_size
To set the size of the command history buffer, use the
history_size command.

Command Availability

This command is supported only on UNIX.
Syntax
history_size {buffer_size}
Parameters
{buffer_size}
Specifies the size of the command history buffer. The default
size is 200.
open
To open a controller, use the open command. The open command
prepares a particular controller for access by the CLI. If you specify
this command when another controller is open during a particular
command session, the CLI closes the currently opened controller
and then opens the specified controller.
Syntax
open [/readonly{=boolean}]
[/domain{=string}] {string}
Parameters
{string}
Specifies the computer name and the controller you want to
open. For the string, use the standard format
\\nodename\AACn, where n is the controller number.
For local controllers, you can omit the \\nodename in the
string specification.
General Control Commands
4-3