Related Information - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
Use the container list command (with the /full switch) after
using the container lock command to display information
about the array you just locked, as in the following example:
AAC0>container list /full
Executing: container list /full=TRUE
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- --------
F: 0 Volume 10.0MB
Note that the example eliminates some items in the container
list display so that you can see an example of the Lk column.
As the result of locking an array (in this example, array 0) with the
container lock command, the Lk column displays L (instead of
a blank) to indicate that the specified array is now locked.

Related Information

container commands:
■
container list
■
container unlock
5-66
Scsi
Usage C:ID:L
NTFS 0:02:0
(page 5-54)
(page 5-121)
Lk
--
L