Controller Show Automatic_Failover; Syntax; Examples; Related Information - Adaptec RAID 2120S Software Reference Manual

controller show automatic_failover

To display the automatic failover status (enabled or disabled) for the
specified controller, use the controller show
automatic_failover command.

Syntax

controller show automatic_failover

Examples

The following example shows that the controller's automatic
failover is currently off (disabled):
AAC0> controller show automatic_failover
Executing: controller show automatic_failover
Automatic failover DISABLED

Related Information

array commands:
■
array set failover
■
array set global_failover
controller commands:
■
controller set automatic_failover
controller Commands
(page 5-101)
(page 5-103)
(page
6-19)
6-23