Switches - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide

Switches

/all{=boolean}
Specifies whether to enable S.M.A.R.T. configurations (enable
exception reporting) for all disks on the system. If you specify
TRUE for this switch, the command enables S.M.A.R.T.
configurations for all disks on the system.
The default is FALSE; the disk set smart command does
not enable S.M.A.R.T. configurations for all disks on the
system. In this case, you would want to specify a SCIS ID to
enable S.M.A.R.T. configurations for a specific disk on the
system.
/clear{=boolean}
Specifies whether to clear S.M.A.R.T. error counts for the
specified disk or disks. If you specify TRUE for this switch, the
command clears error counts for the specified disk or disks.
The default is FALSE; that is, the disk set smart command
does not clear S.M.A.R.T. error counts for disks on the system.
/enable_exceptions{=boolean}
Specifies whether to enable S.M.A.R.T. exceptions reporting
for the specified disk or disks. If you specify TRUE for this
switch, the command enables exception reporting for the
specified disk or disks.
The default is FALSE; that is, the disk set smart command
does not enable S.M.A.R.T. exception reporting for disks on the
system.
/interval_timer{=integer} <?>
/logerr{=boolean}
Specifies whether to enable logging of S.M.A.R.T. exception
reporting for the specified disk or disks. If you specify TRUE
for this switch, the command enables logging of S.M.A.R.T.
exception reporting for the specified disk or disks.
If you specify FALSE for this switch, the command disables
logging of S.M.A.R.T. exception reporting for the specified
disk or disks.
7-14