Playback And Record Notes - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
Table 13-7 Error Codes (Continued)
Code Error/Information
10 Number of drives do
not match the array
type.
11 Unable to initialize
drive.
12 Error occurred while
creating array.
13 Too many spare
drives assigned.
14 Insufficient memory
to run the application.
15 Incorrect controller
number.
16 Controller not
responding.
17 Build/Verify/Clear
failed.
100 You ran ACU and
made changes.

Playback and Record Notes

When using ACU in playback or record mode, note the following:
When recording an array, the ACU does not create a Wait
■
keyword within an array's definition block in a script file.
When playing back any script file generated from the ACU
record option, be aware that the ACU will use the default setting
Wait=Yes when creating an array unless you first edit the script
file and include a Wait=No line in the array's definition block.
■
When recording a RAID 10 (or RAID 50), the ACU cannot map
spare drives assigned to the individual mirror sets (or individual
RAID 5s in the case of RAID 50) to the HotspareDrives list in
the resultant script file. The script file syntax allows only a single
list of spare drives to be assigned to any given array.
13-26
Meaning
The number of drives you selected is
invalid for the type of array specified.
The ACU was unable to initialize one
or more disk drives.
The ACU encountered an error
creating a array.
You attempted to assign more than
the maximum number of spare drives
allowed for the specified array.
There is not enough memory to run
the ACU.
The controller number you specified
is invalid or out-of-range.
The controller has stopped
responding to the ACU.
The build/verify or clear running on
one or more arrays has failed.
The ACU exited with no errors
(success) and a reboot is required.