Update - Adaptec RAID 2120S Software Reference Manual

Default Switch Values
If you do not include the /C switch, the AFU returns a fatal
error message.
If you do not include the /D switch, the AFU creates the UFI
file in the current default drive and directory.
Examples
A:\> AFU SAVE /C 0
The AFU saves flash contents from controller 0 to a UFI file
in the current default drive and directory.
A:\> AFU SAVE /C 1 /D C:\UFI_FILES
The AFU saves flash contents from controller 1 to a UFI file
in the directory C:\UFI_FILES .

UPDATE

The UPDATE command updates a controller's flash
components from the flash image data in a UFI file. You can
use the UPDATE command to update a single controller's flash
components or to update multiple controllers on your system.
You must reset your system or issue a RESET command
following an UPDATE command because this command
effectively shuts down the controller's kernel.
Default Switch Values
If you do not include the /C switch, the AFU returns a fatal
error message.
If you do not include the /D switch, the AFU looks for its UFI
files in the current default drive and directory.
Example
A:\> AFU UPDATE /C 0
daptec Flash Utility V4.0-0 B5749
A
(c)Adaptec Inc. 1999–2002. All Rights Reserved.
Updating Controller 0 (Adaptec 2200S)
Reading flash image file (Build 5749)
AFU is about to update firmware on controller(s) Adaptec
2200S
***PLEASE DO NOT REBOOT THE SYSTEM DURING THE UPDATE***
Using the Adaptec Flash Utility
12-11