Syntax; Switches; Diagnostic Show History - Adaptec RAID 2120S Software Reference Manual

diagnostic show history

To display an internal history log of operations kept in the currently
opened controller that a technical support representative might
need, use the diagnostic show history command.

Syntax

diagnostic show history [/old{=boolean}]
[/current{=boolean}]

Switches

/old{=boolean}
Specifies whether to display the controller's operations history
log from the previous boot of the operating system. If you set
this switch to TRUE, the command displays the history log
from the previous boot of the operating system.
If you do not specify any switches, the command displays the
history log from the previous boot of the operating system (in
other words this switch defaults to TRUE).
If you set this switch and the /current switch to FALSE, the
command displays an appropriate error message and stops
executing.
/current{=boolean}
Specifies whether to display the controller's operations history
log from the currently running system. If you set this switch to
TRUE, the command displays the log from the currently
running system.
This switch defaults to FALSE.
diagnostic Commands
8-13