Diagnostic Load_Arrays; Syntax; Parameters; Related Information - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide

diagnostic load_arrays

To load arrays when the system is in maintenance mode, use the
diagnostic load_arrays command. This command differs
from controller rescan in that it does not rescan the SCSI
channel.
Caution:
Use this command only under the direction of
!
technical support.

Syntax

diagnostic load_arrays
Examples
The following example allows arrays to be loaded:
AAC0>diagnostic load_arrays
Executing: diagnostic load_arrays
All boot time parameters cleared to default values.

Related Information

controller commands:
■
controller rescan
8-6
(page
6-16)