Related Information - Adaptec RAID 2120S Software Reference Manual

Adaptec SCSI RAID Software Reference Guide
Use the
container list
command to display information about the array you
reconfigure
just reconfigured, as in the following example:
AAC0>container list
Executing: container list
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Mirror 15.0MB
Tigris
E: 1 Stripe 15.0MB
As the result of reconfiguring an array (in this example, array 1)
with the container reconfigure command, the Type column
displays Stripe (instead of Volume) to indicate that the specified
array is now a stripe set instead of a volume set.

Related Information

container commands:
■
container create mirror
■
container create raid5
■
container create stripe
■
container create volume
■
container extend file_system
■
container list
5-82
command after using the
Scsi Partition
Usage C:ID:L Offset:Size
None 1:02:0 64.0KB:
1:03:0 64.0KB:
NTFS 1:00:0 64.0KB:
(page 5-5)
(page 5-24)
(page 5-30)
(page 5-35)
(page
(page 5-54)
container
15.0MB
15.0MB
15.0MB
5-43)