Accessing the CLI in MS-DOS
To access the CLI from the MS-DOS prompt, move to the directory
containing the
Accessing the CLI in Windows
To access the CLI:
Note: The following procedure assumes that you accepted the
default location for the software during installation.
1 Click the Start button.
2 Click Programs.
3 Browse to SMBE. The Adaptec program group displays.
4 Click CLI.
Note: In Windows, when the CLI executes an background
command, it displays status information in the title bar of a DOS
command prompt window. The status information includes a
percentage indicating a level of completion.
Accessing the CLI in UNIX
To access the CLI, display a window and type aaccli in any
directory. When the system displays the
CLI commands. The status information appears at the bottom of the
CLI window.
For the commands to work in any directory, the path in the startup
file (
or
.login
.cshrc
is installed. Refer to your operating system documentation for
information on setting up directory paths in the
files.
Using the CLI
This section contains some examples of using CLI commands to
perform common tasks.
executable and then type afacli.
afacli
) must include the directory where the software
Command Line Interface (CLI)
prompt, you can use
CLI>
and
.login
.cshrc
C-3