Table of Contents
Advertisement
Insert the driver disk, then wait until you are prompted to install a driver.
4
Press S to specify that the driver is on a floppy disk, then press Enter.
5
The computer reads the disk.
When the Adaptec SAS driver is found, press Enter.
6
Follow the on-screen instructions to complete the installation.
7
Continue with
8
Installing with Red Hat Linux
You will need your Red Hat Installation CD to complete this task. To install the HostRAID
controller driver while installing Red Hat Linux:
Insert the first Red Hat Installation CD.
1
Restart your computer.
2
When the Red Hat Welcome screen displays, type
3
When prompted, insert the driver disk, then select OK.
4
Follow the prompts to set up the environment you want.
5
If you are installing other third-party devices, install them now. Otherwise, select Done.
6
Complete the Red Hat Linux installation, following the instructions included with your
7
operating system.
Continue with
8
Installing with SuSE Linux
To install the HostRAID controller driver while installing SuSE Linux:
Insert the first SuSE Installation CD.
1
Restart your computer.
2
When the SuSE installation selection screen displays, do the following:
3
For UL 1.0—press the Alt key to have it prompt for a driver disk, select installation option
●
from the Menu, then press Enter.
For SLES 9, SuSE 9.x and 10—press the F6 key, select installation option from the Menu,
●
then press Enter.
When prompted, insert the driver disk, then press any key to continue.
4
Follow the prompts to set up the environment you want.
5
If you are installing other third-party devices, install them now. Otherwise, select Back.
6
Complete the SuSE Linux installation, following the instructions included with your
7
operating system.
Continue with
8
Chapter 7: Installing the Driver and an Operating System
Managing Your Storage Space on page
Managing Your Storage Space on page
Managing Your Storage Space on page
40.
at the Boot: prompt.
linux dd
40.
40.
35
●
Advertisement
Table of Contents
