Afu Commands - Adaptec RAID 21610SA Installation And User Manual

9 If there are additional UFI files this process is repeated until the
complete image has been read, the controller flash is updated
with the new image.

AFU Commands

The following pages describe each of the AFU commands in detail.
For ease of use, the commands are presented in alphabetical order.
HELP
The HELP command displays a summary of AFU functions and
command switches.
To display the help text for the AFU, you can also type AFU /?
Options
None
Default Switch Values
None
Examples
A:\> AFU HELP
A:\> AFU /?
LIST
The LIST command displays the AFU-supported controllers
installed on your system. Use this command to see which
controllers are installed on this system, or to identify the ID
numbers assigned to each physical controller.
You do not have to restart the computer upon completion of this
command.
Options
None
Default Switch Values
None
Example
A:\> AFU LIST
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2002. All Rights Reserved.
Controllers Detected and Recognized:
Controller #0 (03:05:00) Adaptec 2410
DOS Utilities
B-7