Table of Contents
Advertisement
HRCONF Commands
Perform the following functions from the command line:
backup
create
delete
getconfig
hrconf backup
For large-scale deployments, stores the current controller and disk drive configuration setting
to a specific file. Stored files can be used with the
controller or disk drive. To restore, the controller or disk drive must have the same
configuration as it did before the backup. For example: the same type of controller, same
number and type of disk drives with same IDs and channels.
Syntax
hrconf backup <Controller#> <Filename>
Parameters
Controller# is the controller number
Filename is the relative or absolute path with filename
Example
hrconf backup 1 c:\windows\hr2200
Return values
SUCCESS: 0x00 indicates the command completed successfully
FAILURE: 0x01 indicates the command failed
hrconf create
Creates logical drives. You must provide the channel and device ID of the physical drives. On
redundant logical drives, HRCONF performs autosynchronization.
Syntax
hrconf create <Controller#> LOGICALDRIVE [Options] <Size> <RAID#> <CHANNEL#
DRIVE#> [CHANNEL# DRIVE#] ... [noprompt]
Appendix E: Installing and Using the Command Line Utility
HRCONF Commands
getstatus
getversion
rescan
restore
RESTORE
setconfig
setstate
task
command to restore to another
79
●
Advertisement
Table of Contents
