2.11 Installing The A-Series Monitor And Keyboard; Installation Procedure; Figure 2-7 Connecting The A-Series Monitor And Keyboard - adept technology 550 Instruction Handbook Manual

2.11 Installing the A-Series Monitor and Keyboard

NOTE: The peripheral equipment such as the keyboard and monitor
supplied by Adept are intended for use in light industrial conditions. In
more severe conditions, they should be protected with a suitable
enclosure.

Installation Procedure

An A-Series Adept MV controller can be configured with a color monitor and an extended
keyboard with built-in trackball. Both of these devices connect to the VGB module.
See Figure 2-7 for details; the steps are listed below.
1. Make sure the controller is turned off before making any connections.
VGB
OK
V
I
D
E
O
B
U
S
M
O
N
I
T
O
R
1
2
3
4
P
O
I
N
T
E
R
KEYBOARD
Figure 2-7. Connecting the A-Series Monitor and Keyboard
2. Connect the monitor signal cable to the
module.
3. Connect the double-ended keyboard cable to the
POINTER
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
A-Series Keyboard/Trackball
connector on the VGB module.
Adept 550 Robot Instruction Handbook, Rev A
Installing the A-Series Monitor and Keyboard
A-Series Color Monitor
connector on the VGB
MONITOR
connector and the
KEYBOARD
27