Table of Contents
Advertisement
5.5
Maintenance and Inspection of Air Filters
Adept PA-4 Fan Filter Inspection and Cleaning
The air filter located on the front of the chassis should be inspected regularly and cleaned
at the first sign of dust or dirt buildup. The filter must be inspected and cleaned at least
once per month. Regular cleaning will prolong the life of the filter. If the filter becomes
clogged or unusable for any reason, you will need to order a new air filter. The part
number for the filter is 40330-11200.
WARNING: Dangerous voltages are present inside the power chassis.
Turn off the power to the power chassis and protect it against an
unauthorized return to service, before opening the front grill to inspect
the air filter. Failure to observe this warning could cause injury or damage
to your equipment.
1. Turn off the power to the power chassis and protect it against an unauthorized
return to service.
2. Open the front grill by loosening two screws and swinging the grill out.
3. Pull the air filter out and inspect for dust or dirt particles. If cleaning is required,
use compressed air to clean the filter.
4. Replace the cleaned air filter and secure the grill.
Adept MV Controller Fan Filter Inspection and Cleaning
The air filter located on the front of the chassis should be inspected regularly and cleaned
at the first sign of dust or dirt buildup. The filter must be inspected and cleaned at least
once per month. Regular cleaning will prolong the life of the filter. If the filter becomes
clogged or unusable for any reason, you will need to order a new air filter; the Adept part
number is 40330-11190.
1. Turn off the controller and protect it against an unauthorized return to service.
2. Open the front grill by loosening two screws and swinging the grill out.
3. Pull the air filter out and inspect for dust or dirt particles. If cleaning is required,
use compressed air to clean the filter.
4. Replace the cleaned air filter and secure the grill.
5.6
Check Lamps on VFP
Use the Lamp Test button on the external Front Panel to test the lamps once per month.
Replace any lamps that are not working. Contact Adept Customer Service for replacement
information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Adept 550 Robot Instruction Handbook, Rev A
Maintenance and Inspection of Air Filters
79
Advertisement
Table of Contents
