Table of Contents
Advertisement
Chapter 1 - Safety
WARNING:
Electrical Hazard!
Impact Hazard!
!
Never remove any safeguarding and never make changes in the system
that will de-commission a safeguard.
1.9
Qualification of Personnel
This manual assumes that the personnel have attended an Adept training course and have
a working knowledge of the system. The user must provide the necessary additional
training for all personnel who will be working with the system.
As noted in this handbook, certain procedures should be performed only by skilled or
instructed persons. For a description of the level of qualification Adept uses the standard
terms:
• Skilled persons have technical knowledge or sufficient experience to enable them
to avoid the dangers which electricity may create (engineers and technicians).
• Instructed persons are adequately advised or supervised by skilled persons to
enable them to avoid the dangers which electricity may create (operating and
maintenance staff).
All personnel must observe sound safety practices during the installation, operation and
testing of all electrically powered equipment. To avoid injury or damage to equipment,
always remove power by disconnecting the AC power cord from the source before
attempting any repair or upgrade activity.
WARNING: The user is obligated to get confirmation from every
entrusted person before they start working with the robot about the
!
following subjects:
1.) The person has received the instruction handbook, has
read it, has understood it and
2.) will work in the described manner.
1.10 Transport
Always use adequate equipment to transport and lift Adept devices. See Chapter 2 for
more information on transporting, lifting, and installing.
WARNING: Do not stay under the robot while it is transported.
!
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Adept 550 Robot Instruction Handbook, Rev A
Advertisement
Table of Contents
