Post-Service Tests; Start-Up Test - Segway Personal Transporter i2 Parts Replacement Manual

A. Post-Service Tests
This chapter describes standard tests to perform after servicing the Gen 2 Segway PT.
The following warnings apply to instructions in this Section A regarding Post‐Service Tests.
Read all
instructions.
ESD PROCEDURES
Any time repair involves opening the console or chassis cover, best-
practice electrostatic discharge (ESD) control procedures must be
followed. Failure to follow ESD procedures could result in personal
injury or damage to property.

Start-up Test

To perform a start-up test, do the following:
Make sure Wireless InfoKey controller properly powers on machine without an error message.
•
Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement Guide
Failure to do so could result in serious
injury or death.
A‐1