Segway Personal Transporter i2 Parts Replacement Manual page 18

FASTENERS
Use only Segway-approved fasteners.
•
Do not tighten or reuse any fastener except the screws used to
•
attach the battery packs, wheel nuts, and LeanSteer frame.
Instead, when any other fastener is loose or removed, replace
the fastener with a new Segway-approved fastener. See
Appendix C, "Fasteners"
Do not attempt to repair any stripped or damaged screw hole.
•
Instead, replace the part. If replacement part is not available,
do not reassemble.
Insert fasteners slowly and carefully. Do not cross-thread or
•
over-tighten fasteners. Tighten only to the prescribed torque.
Failure to adhere to these warnings could lead to serious injury
•
or death or damage to property.
1‐2
for more information.
Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement