Commissioning; Connecting The Sensor To The Pc; Ill. 24 Entering The Ip Address Of The Sensor - Baumer OX200 Operating Manual

Baumer
7

Commissioning

7.1

Connecting the sensor to the PC

INFO
Prerequisite for using the web interface is a web browser on your PC, Mozilla Firefox from Ver-
sion 69 or Google Chrome from Version 77.
Internet Explorer is not supported in any version and cannot be used for connection to the
sensor.
Microsoft Edge is not officially supported. However, in most cases it can be used without restric-
tions.
The following section describes how to connect the sensor to the PC. The prerequisites for this
are that the DHCP is not active and the IP address of the PC is from the 192.168.0.XXX ad-
dress space. Otherwise, please follow the instructions under
[} 52].
Condition:
ð The PC contains the web browser Mozilla Firefox from version 69 or Google Chrome from
version 77.
Instruction:
a) Start the web browser on your PC.
b) Enter the IP address of the sensor in the address bar of the web browser.
The factory setting for the IP address is 192.168.0.250.
Ill. 24: Entering the IP address of the sensor
OX200 | V2 Operating Manual
Commissioning
Allocating an IP address to the PC
| 7
51