3
|
Description
Holding Re-
The following table provides an overview of the Index Commands Holding Registers. These
gisters
can be reached with functions 03/06/16.
Address
0
(1 register)
1
(1 register)
501
(1 register)
Input Re-
The following tables provide an overview of Index Commands Input Registers. These can be
gisters
reached with function 04.
This function code is used to read from 1 to 125 related input registers in a remote device. The
query PDU specifies the start register address and the number of registers. The registers are
addressed in the PDU starting with zero. For this reason, input registers with the numbers 1-16
are addressed as 0-15.
Address
0 ... 32
(33 bytes)
26
Data element
Request parametrisation
mode.
Exit parametrisation
mode.
Load parameter setup
number.
Data element
Data type
Vendor info
String[65]
Operating Manual
Data type Access Description
UInt16
Write
Request parametrisation mode
by writing a random value.
UInt16
Write
Exit active parametrisation
mode by writing a random value.
UInt16
Write
Load a previously parametrised
parameter setup.
Access
Read
Offset
Description
0
Manufacturer
name
OX200 | V2
Baumer
Need help?
Do you have a question about the OX200 and is the answer not in the manual?