Baumer OX200 Operating Manual page 67

Baumer
f) Go online (connection to PLC established).
g) Click on Activate_Read_ConfigData and then press Ctrl + T.
Result:
ü Parameter 151 is read.
ü
The value of Parameter 151 is displayed under Controller Tags.
Writing parameter setup
Instruction:
a) Open MainRoutine.
b) Under Controller Tags | Edit Tags, create the variable Activate_Write_ConfigData
with data type BOOL.
c) Under Controller Tags | Edit Tags, create the variable ConfigData_Value_SINT with
the data type SINT.
d) Create the following program modules:
OX200 | V2 Operating Manual
Commissioning | 7
67