7
|
Commissioning
Installing General Station Description (EDS) files
After activating EtherNet/IP via the web interface of the sensor, you have to install the EDS file
(product-specific driver) in the Rockwell software. The EDS file describes the scope of the Eth-
erNet/IP function in the device (e.g. the available modules) and is required for configuration.
INFO
The EDS file is available for download at www.baumer.com/OX200.
To install the EDS file, proceed as follows:
Instruction:
a) Open the Rockwell software.
b) In the Tools menu, select | EDS Hardware Installation Tool.
ü
The Rockwell Automation's EDS Wizard window opens.
c) Click on Continue.
60
Operating Manual
Baumer
OX200 | V2
Need help?
Do you have a question about the OX200 and is the answer not in the manual?