Opc Ua: Adding Sensor In Uaexpert Client [Oxm] - Baumer OX200 Operating Manual

Baumer
7.5

OPC UA: Adding sensor in UaExpert client [OXM]

INFO
The example in this section refers to the use of the free-of-charge OPC UA client UaExpert. You
can obtain the software following prior registration at https://www.unified-automation.com.
Of course, the sensor can also be configured using the software of other manufacturers and
their controls. The steps must then be carried out correspondingly.
To add the sensor to the OPC-UA client, proceed as follows:
Instruction:
a) Open the UaExpert client.
b) In the top toolbar, click the Add Server button.
c) In the Add Server window, open the structure underneath Customer Discovery.
d) Select <Double click to Add Server...> by double clicking.
e) In the Enter URL window, enter the IP address of the sensor.
f) Confirm with OK.
ü
The sensor appears in the Add Server window under Custom Discovery.
g) Confirm with OK.
ü The sensor appears in the Project window under Project | Servers.
OX200 | V2 Operating Manual
Commissioning | 7
71