Opc Ua [Oxm]; Ill. 13 Opc Ua - Uaexpert Client - Surface - Baumer OX200 Operating Manual

Baumer
3.3.5

OPC UA [OXM]

OPC UA (Open Platform Communications United Architecture) is an open interface standard,
which was developed specifically for the requirements of automation technology. An increasing
number of controls and systems already support the required client functionality. Various soft-
ware libraries are available for PC-based systems. Additional information can be found on the
website of the OPC foundation. Visit the following website:
For information regarding the commissioning of OPC UA, see
pert client [OXM]
INFO
The example in this section refers to the use of the free-of-charge OPC UA client UaExpert. You
can obtain the software following prior registration at https://www.unified-automation.com.
Of course, the sensor can also be configured using the software of other manufacturers and
their controls. The steps must then be carried out correspondingly.
Ill. 13: OPC UA – UaExpert Client – Surface
OX200 | V2
[} 71].
Node
n
Variable node (partial read/write)
n
Variable node (characteristic or property)
n
Method node (action with call)
n
Operating Manual
Description
https://opcfoundation.org
OPC UA: Adding sensor in UaEx-
| 3
29