Baumer OX200 Operating Manual page 31

Baumer
MethodSet The following table provides an overview of the MethodSet folder in the function tree.
OPC UA command
LoadParameterSetup
ParameterSet The following table provides an overview of the ParameterSet folder in the function tree.
OPC UA command
ActiveParameterSetupNumber
MeasurementValues
MeasurementValuesBlock
ProductId
Parameter- The following table provides an overview of the ParameterSetup folder in the function tree.
Setup
OPC UA command
ActiveParameterSetupNumber
LoadParameterSetup
Unlock the sensor
To carry out settings on the sensor, it must be unlocked first. For this process, proceed as fol-
lows:
Instruction:
a) Open the function tree of the sensor in the Address Space window.
b) In the structure of the function tree, navigate to Root | Objects | Device Set | OX-Line |
Lock | InitLock.
c) In the context menu (right-click InitLock) select the option Call.
d) In the Call InitLock on Lock window, confirm with Call.
OX200 | V2
Sensor command
Load stored parameter setup 1-3. The value 1-3 must be
given.
Sensor command
Shows the currently active parameter setup.
All current measurement results
Last 100 measurement results
Item/order number
Sensor command
Shows the currently active parameter setup.
Load the parameter setup selected by the user.
Operating Manual
Description | 3
31