System Status (Sst); Target Color Space (Tcs) - Christie Mirage WQ-L User Manual

System Status (SST)

SST
Preference
CONTROL GROUP:
Description
Retrieve the various system status groups.
Subcode
<No Subcode >
ALRM
CONF
COOL
HLTH
LAMP
SIGN
SYST
TEMP
VERS
Examples:
(SST+ALRM?) returns (SST+ALRM!000 002 "101" "Prism temperature") 
where parameters are P1=index number, P2=error level, P3=value, P4=description. 
Error level is 0=no errors or warnings, 1=warning, 2=error, 3=error and warning.

Target Color Space (TCS)

TCS
Preference
CONTROL GROUP:
Description
This command is used to set the ArrayLOC target gamut. Several preset color spaces are provided in addition
to four user setting gamuts. The control subcodes provide access to all the presets. Due to the large number of
sub-codes they are not all listed. Instead a simple substitution for the small 'x' is made, according to the
following table:
M
E
S
H
F
1
2
3
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Returns information on all status groups, with one message
per item.
Returns a summary of any active alarms.
Returns configuration data - model, sn, build date, etc.
Returns cooling data - cooling fans, air flow, etc.
Returns system health.
Returns LAMP operational data.
Returns signal data - freq, etc.
Returns system data - power, hours of use, shutter open, etc.
Returns temperature data.
Returns version numbers.
Power Up
SUBCLASS:
Max drives, read only
EBU, read only
SD Video, read only
HD Video, read only
Factory, read only
User 1
User 2
User 3
Serial Command Reference
Status
ACCESS LEVEL:
Operator
ACCESS LEVEL:
100