Table of Contents
Advertisement
Preparing the Site
This document provides facilities requirements for preparing and installing Sun
StorEdge™ 6120 array and 6120 high availability (HA) array configurations. To
determine the total components and arrays your shipment will include, consult your
local Sun sales representative.
This document is organized as follows:
"Sun StorEdge 6120 Array Configurations" on page 1
I
"Safety Information" on page 3
I
"Environmental Requirements" on page 4
I
"Cabling Specifications and Requirements" on page 7
I
Sun StorEdge 6120 Array Configurations
The Sun StorEdge 6120 array is a high-performance, modular, scalable storage
device that contains an internal RAID controller and up to 14 disk drives with Fibre
Channel connectivity to the data host. In a Sun StorEdge 6120 HA array
configuration, two array controller units are paired using interconnect cables for
back-end data and administrative connections. The HA array configuration provides
redundant hardware RAID controllers with mirrored caches, and redundant host
channels for continuous data availability for host applications.
The array is available either rackmounted in a Sun StorEdge Expansion Cabinet or
rack ready for installation in a supported Sun cabinet, as shown in
install up to 10 arrays in one cabinet.
. You can
FIGURE 1
1
Advertisement
Table of Contents
